@article { author = {Majnounian, Baris and jabari, M and Gholami, M and YarAhmadi, R and Deljouei, A}, title = {Assessment of hand-arm vibration caused by chainsaw in beech tree felling and bucking operations}, journal = {Iranian Journal of Forest}, volume = {9}, number = {3}, pages = {301-313}, year = {2017}, publisher = {Iranian Society of Forestry}, issn = {2008-6113}, eissn = {2423-4435}, doi = {}, abstract = {Nowadays, one of the most popular tools to cut and process the trees in northern forests of Iran is chainsaw. One of its most important defects is constant vibration during operation. The aim of this study was to investigate the hand-arm vibration in beech tree cutting and bucking in Kheyrud forest, Nowshahr, Mazandaran Province. Three beech trees and bucks were selected and hand-arm vibration was measured by using vibrometer Bruel & Kjear 2237 in the back and front handles of chainsaw in three directions x, y, and z. The index of vibration equal value (aeq), vibration total value (ahv), transmitted vibration coefficient (Tr) and daily exposure duration (A(8)) were used to explain the chainsaw vibration. In cutting stage, the value of aeq on the x-axis was significantly higher than the two others in front and back handles (P= 0.010) and in bucking stage, the value of aeq on x-axis is significantly more than z-axis, (P= 0.008). The value of ahv during logging (P= 0.017) and bucking (P=0.013) in the back handle is significantly higher than front handle. Tr coefficient in the back handle of chainsaw while cutting (2.78) was significantly higher than the same handle in bucking (2.75) mode (P= 0.011). The results showed that the values of Tr, aeq and ahv in the back handle is more than front one, hence it needs immediate operation to improve it ergonomically.  }, keywords = {Tree felling,Ergonomics,Logging,Occupational injuries,Hand-arm vibration}, title_fa = {ارزیابی ارتعاش دست- بازو در اثر قطع و بینه‌بری درختان راش با اره موتوری}, abstract_fa = {اره‌ موتوری متداول­ترین ابزار قطع و تبدیل در جنگل­های شمال کشور محسوب می­شود که یکی از مهم‌ترین عیوب آن، ارتعاش دائمی در حین کار است. هدف از این پژوهش، بررسی ارتعاش دست-بازو در عملیات قطع و بینه­بری درختان راش در جنگل خیرود نوشهر در استان مازندران است. سه درخت و سه بینه از گونۀ راش انتخاب و با استفاده از دستگاه ارتعاش­سنج Bruel & Kjear 2237، همزمان اندازه‌گیری ارتعاش دست- بازو در دستۀ عقب و دستۀ جلوی اره موتوری در­ سه جهت x، y و z انجام گرفت. از شاخص­های شدت ارتعاش معادل اره ‌موتوری (aeq)، مقدار کلی ارتعاش اره‌ موتوری (ahv)، ضریب قابلیت انتقال ارتعاش (Tr) و دورۀ مواجهۀ روزانه ((8)A) برای ارزیابی ارتعاش اره موتوری استفاده شد. در مرحلۀ قطع، مقدار aeq در محور x به‌طور معنی­داری بیشتر از دو محور دیگر در دسته­های جلو و عقب به‌دست آمد (010/0 = P) و در بینه­بری، مقدار aeq در محور x به‌طور معنی­داری بیشتر از محور z به‌دست آمد (008/0 = P). مقدار ahv هنگام قطع درختان (017/0 = P) و بینه‌بری (013/0 = P) در دستۀ عقب به‌طور معنی­داری بیشتر از دستۀ جلو به‌دست آمد. ضریب Tr در دستۀ عقب اره موتوری در هنگام قطع (78/2) به‌طور معنی­داری بیشتر از همین دسته در حالت بینه‌بری (57/2) است (011/0 = P). نتایج نشان داد که شدت ارتعاش در دستۀ عقب بیشتر از دستۀ جلو است که بیانگر لزوم اقدامات سریع از نظر بهبود ارگونومیک دستۀ عقب است.}, keywords_fa = {ارتعاش دست-بازو,ارگونومی,بهره‌برداری,صدمات شغلی,قطع درخت}, url = {https://www.ijf-isaforestry.ir/article_52165.html}, eprint = {https://www.ijf-isaforestry.ir/article_52165_6f43cacbe806eabb6b70465699e3d0b8.pdf} } @article { author = {Rahbari Sisakht, Saeed and Moayeri, M. H. and Abdi, Ehsan and Rahmani, Ramin and ., .}, title = {Road geometric design and its effect on some chemical and biochemical indicators of soil of adjacent forest stands}, journal = {Iranian Journal of Forest}, volume = {9}, number = {3}, pages = {315-331}, year = {2017}, publisher = {Iranian Society of Forestry}, issn = {2008-6113}, eissn = {2423-4435}, doi = {}, abstract = {Forest roads are the most important infrastructure to access and apply the forest management activities, which they can impose a significant impact on adjacent stands. The objective of this study was to investigate the effect of the forest road geometric plan (switchback, curve, and straight road) on some chemical and biochemical indicators of soil in adjacent stands for forest road planning. Considering three different road geometric plans, from the edge of the road up to 100 meters toward the forest interior, the rate of organic carbon, nitrogen, and dehydrogenase and urease enzymes activity in forest soil at the depth of 0-10 and 10-20 cm in two forest types was measured. Data were analyzed by using t-test, ANOVA, and broken-line regression model. The results of ANOVA showed significant effect of forest type and geometric plans of the road on measured variables. In addition, results indicated that by increasing the depth of soil, the impact of the road on some measured indicators was not significant. The results of broken line regression model showed that the lowest range of road effect was related to the straight road (13 m) and its highest range was related to switchback road (42 m). Results of this study can provide guidelines for forest road planners and evaluators to design the road effect buffer at the stage of forest roads network planning and to minimize the effect of forest road on its adjacent stands.}, keywords = {Forest Roads,Road Geometric plan,Broken-line Regression,Soil Biochemistry}, title_fa = {طرح هندسی جاده و تأثیر آن بر برخی شاخص‌های شیمیایی و بیوشیمیایی خاک توده‌های جنگلی مجاور}, abstract_fa = {جاده‌های جنگلی مهم‌ترین زیرساخت برای دسترسی و انجام فعالیت‌های مدیریتی جنگل به حساب می‌آیند و می‌توانند بر توده‌های حاشیه‌ای تأثیر بسزایی داشته باشند. هدف این پژوهش بررسی میزان برد اثر طرح هندسی جاده‌های جنگلی (پیچ، قوس و جادۀ مستقیم) بر برخی شاخص‌های شیمیایی و بیوشیمیایی خاک در توده‌های مجاور آن بود. با در نظر گرفتن سه طرح مختلف هندسی جاده، از کنارۀ جاده تا عمق 100 متری از آن به‌سمت درون جنگل اقدام به اندازه‌گیری فاکتورهای کربن آلی خاک، ازت و حد فعالیت دو آنزیم دهیدروژناز و اوره‌آز در خاک جنگل در دو عمق 10-0 و 20-10 سانتی‌متری در دو تیپ مختلف جنگلی شد. به‌کمک تجزیة واریانس، مقایسۀ میانگین‌ها و مدل رگرسیون خط شکسته، اطلاعات به‌دست‌آمده تجزیه‌وتحلیل شد. نتایج تجزیة واریانس نشان‌دهندۀ تأثیر معنی‌دار تیپ جنگلی و طرح هندسی جاده بر متغیرهای اندازه‌گیری‌شده بود. همچنین نتایج نشان داد که با افزایش عمق خاک، تأثیر جاده بر برخی شاخص‌های اندازه‌گیری‌شده معنی‌دار نبود. نتایج مدل رگرسیون خط شکسته نشان داد که کمترین برد (فاصله) اثر جاده مربوط به حالت مستقیم جاده به میزان 13 متر و بیشترین آن مربوط به داخل پیچ به میزان 42 متر بود. نتایج این تحقیق می‌تواند راهنمایی برای طراحان و ارزیابان جاده‌های جنگلی برای ترسیم بافر اثر جاده در مرحلۀ طراحی شبکۀ جاده‌های جنگلی به حداقل رساندن تأثیر جادة جنگلی بر تودۀ کناری خود باشد.}, keywords_fa = {اثرهای جاده,بیوشیمی خاک,جاده‌های جنگلی,رگرسیون شکسته,طرح هندسی جاده}, url = {https://www.ijf-isaforestry.ir/article_52176.html}, eprint = {https://www.ijf-isaforestry.ir/article_52176_43b93d0075da5a7fe457f8bfba9e6e3a.pdf} } @article { author = {Jahantigh, M.}, title = {The effect of combined engineering structure on reducing water use of Eucalyptus plantations in Sistan plain}, journal = {Iranian Journal of Forest}, volume = {9}, number = {3}, pages = {333-343}, year = {2017}, publisher = {Iranian Society of Forestry}, issn = {2008-6113}, eissn = {2423-4435}, doi = {}, abstract = {Combating wind erosion is one of the functions of vegetation in environments prone to this type of erosion. But vegetation establishment in such places is limited. In such a situation, the use of physical protection methods like plastic pipe is required to plant trees. The aim of research is to find out the scientific method to re-establish the vegetation cover and desert prevention with low-water-using in dry land regions. In order to conduct the research, 20 holes, 80 cm in diameter and 120 cm in depth were drilled and Eucalyptus seedlings were planted inside them. Inside plastic tubes with a diameter of 15 and a length of 80 cm, 10 seedlings were placed, so that they were 50 cm high and 30 cm inside the soil. The irrigation time was determined using the Time-domain reflectometry, TDR, and the seedlings were irrigated. Seedling height, crown cover and water were measured monthly. 18 soil samples were taken from three plots and six depths, and some of their characteristics were measured. Dates were analyzed using SPSS software. The statistical analysis showed that there is no significant difference between the canopy cover of the two treatments, but there are significant differences between the height, biomass and water consumption of seedlings at the level of 0.01. In addition, biomass index for seedlings of these treatments was estimated to be 1.5 and 6.3, respectively. In order to grow a square meter of canopy and one meter height seedling in treatment with tube, 505 and 132.7 liters of water are required, while for tubeless treatment, they are 1422.22 and 471.2 liters, respectively.}, keywords = {Biomass index,Planting irrigation,Vegetation cover}, title_fa = {تأثیر سازۀ همراه در کاهش مصرف آب به‌منظور استقرار نهال اکالیپتوس در دشت سیستان}, abstract_fa = {مبارزه با فرسایش بادی یکی از کارکردهای پوشش گیاهی در محیط‌های مستعد این نوع فرسایش است. اما در چنین شرایطی معمولاً برای استقرار نهال نیاز به استفاده از روش‌های حفاظت فیزیکی است. استفاده از سازۀ همراه یا سازه مهندسی یکی از روش‌های حفاظت فیزیکی به‌منظور استقرار پوشش گیاهی است. سازۀ همراه در این تحقیق لوله‌های‌ پلاستیکی است که برای کمک به استقرار نهال اکالیپتوس استفاده شد. برای پژوهش، 20 چاله‌ به قطر 80 و عمق 120 سانتی‌متر حفر و نهال‌ اکالیپتوس  (Eucalyptus microtheca) داخل آنها کاشته شد. 10 نهال داخل لوله‌های‌ پلاستیکی با قطر 15 و ‌طول 80 سانتی‌متر گذاشته شد، به‌طوری که 50 سانتی‌متر بالا و 30 سانتی‌متر داخل خاک قرار گرفت و 10 نهال نیز بدون سازه همراه کاشته شد.. با استفاده از دستگاه رطوبت‌سنج (TDR) زمان آبیاری تعیین و نهال‌ها‏ آبیاری شدند. ارتفاع نهال، تاج‌پوشش و آب مصرفی به‌صورت ماهانه اندازه‌گیری شد. 18 نمونه خاک از سه محل پلات‌ها و شش عمق برداشت و برخی ویژگی‌های‌ آنها اندازه‌گیری شد. داده‌ها با نرم‌افزار SPSS تحلیل آماری شد. تحلیل آماری نشان داد که بین تاج‌پوشش دو تیمار مزبور اختلاف معنی‌داری وجود ندارد، ولی بین ارتفاع، زی‌توده و میزان آب مصرفی‏ نهال‌ها در سطح 01/0 اختلاف معنی‌دار است. علاوه‌ بر آن، شاخص زی‌توده برای نهال‌های تیمارهای مزبور به‌ترتیب 5/1 و 3/6 برآورد شد. برای رشد یک متر مربع تاج‌پوشش و یک متر ارتفاع نهال در تیمار همراه با لوله به‌ترتیب 505 و 7/132 لیتر آب نیاز است، درحالی که برای تیمار بدون لوله به‌ترتیب 2/1422 و 2/471 لیتر است.}, keywords_fa = {آبیاری نهال,تاج‌پوشش,شاخص زی‌توده}, url = {https://www.ijf-isaforestry.ir/article_52166.html}, eprint = {https://www.ijf-isaforestry.ir/article_52166_543cd6dfa6a071fcaa1f6addaa50d947.pdf} } @article { author = {Maghsoudloo, S and Mahboobi, M.R. and Abedi Sarvestani, A}, title = {Investigation of the factors affecting the knowledge needs of Eucalyptus growers in Golestan Province}, journal = {Iranian Journal of Forest}, volume = {9}, number = {3}, pages = {345-360}, year = {2017}, publisher = {Iranian Society of Forestry}, issn = {2008-6113}, eissn = {2423-4435}, doi = {}, abstract = {The aim of this descriptive and survey research was to determine the factors affecting the knowledge needs of Eucalyptus growers in Golestan Province. The data were collected using descriptive-correlation research and survey techniques. The study population consisted all of 300 Eucalyptus growers in Golestan province, out of which, 170 growers were randomly selected. Data was collected through a questionnaire which its content validity and reliability were confirmed by a pilot study using experts comments. The correlation test showed that there is a significant relationship between variables age, literacy level, history of agricultural activity, Eucalyptus cultivation background, wood crop cultivation area, visiting experts and people with experience in the field of wood growing, attendance in extension classes and programs, presence in collective visit programs from typical and model fields, number of hours listening to the radio during the day and knowledge needs of Eucalyptus growers in planting, growing and harvesting. Regression analysis results showed that Eucalyptus cultivation background, attendance in extension classes and programs, visiting experts and people with experience in the field of wood and wood crop cultivation area are the most important predictors for knowledge needs of Eucalyptus growers in the fields of planting, growing, and harvesting. This study recommended continuous use of practices such as extension classes and programs, collective visit programs from typical and model fields, visiting experts and people with experience in the field of wood growing, preparing and production the radio programs in wood grower training with the aim of response to their knowledge needs.}, keywords = {Wood cultivation,Educational need,Extension program,Golestan province}, title_fa = {بررسی عوامل مؤثر بر نیازهای دانشی کشتکاران اکالیپتوس در استان گلستان}, abstract_fa = {این تحقیق توصیفی و پیمایشی با هدف تعیین عوامل مؤثر بر نیازهای دانشی کشتکاران اکالیپتوس در استان گلستان انجام گرفت. جمعیت مورد بررسی، کلیۀ کشتکاران اکالیپتوس در استان گلستان به تعداد 300 نفر بودند که از بین آنها 170 نفر به‌صورت تصادفی انتخاب شدند. جمع‌آوری اطلاعات با استفاده از پرسشنامه صورت گرفت که روایی محتوایی آن با استفاده از نظر متخصصان و پایایی آن با اجرای پیش‌آزمون تأیید شد. نتایج همبستگی نشان داد بین متغیرهای سن، سطح تحصیلات، سابقۀ فعالیت کشاورزی، سابقۀ کشت اکالیپتوس، سطح زیر کشت زراعت چوب، حد مراجعه به کارشناسان و افراد با تجربه در زمینۀ تولید چوب، حد شرکت در کلاس‌ها و برنامه‌های ترویجی، حد حضور در برنامه‌های بازدید جمعی از مزارع نمونه و الگویی و تعداد ساعات گوش کردن به رادیو در طول روز با نیاز دانشی کشتکاران در زمینۀ کاشت، داشت و برداشت اکالیپتوس رابطۀ معنی‌داری وجود دارد. نتایج تحلیل رگرسیون نشان داد که سابقۀ کاشت اکالیپتوس، شرکت در کلاس‌ها و دوره‌های ترویجی، مراجعه به کارشناسان و افراد باتجربه در زمینۀ تولید چوب و سطح زیر کشت زراعت چوب از مهم‌ترین متغیرهای پیش‌بینی‌کنندۀ نیازهای دانشی کشتکاران در زمینۀ کاشت، داشت و برداشت اکالیپتوس است. استمرار استفاده از شیوه‌هایی چون تشکیل کلاس‌ها و برنامه‌های ترویجی، بازدید جمعی از مزارع نمونه و الگویی، مراجعۀ کشتکاران به کارشناسان و افراد باتجربه در تولید چوب و تهیه و تولید برنامه‌های رادیویی در آموزش کشتکاران با هدف پاسخگویی به نیاز آموزشی آنان، از جمله پیشنهادهای این پژوهش است. }, keywords_fa = {استان گلستان,برنامۀ ترویجی,زراعت چوب,نیاز آموزشی}, url = {https://www.ijf-isaforestry.ir/article_52167.html}, eprint = {https://www.ijf-isaforestry.ir/article_52167_6e8b4347b8dd5c3fdd86f11f1b9877c3.pdf} } @article { author = {Sadeghi Kaji, H. and Soltani, A.}, title = {Single tree volume modeling for even age Persian oak (Quercus brantii) coppice in Central Zagros (Case study: Chaharmahal VA Bakhtiari province, Ardal and Kiar district)}, journal = {Iranian Journal of Forest}, volume = {9}, number = {3}, pages = {361-372}, year = {2017}, publisher = {Iranian Society of Forestry}, issn = {2008-6113}, eissn = {2423-4435}, doi = {}, abstract = {The idea of this research is to select the appropriate model for the rapid estimation of volume in even-aged Persian oak coppice stands. For this purpose, 19 widely used univariate and bivariate models were used in volume estimation. Initially, actual volume data from 73 cut trees in different diameter classes in 12 forests of Ardal and Kiar cities were divided into two sets of 70% for modeling and 30% for validation. Then, the coefficients of the selected models were calculated using the weighted least squares method. Models with significant coefficients were ranked by the root mean square error and R-squared. Of the 19 models, nine models were selected. The fitting results of the selected models showed that the least amount of root mean square error (0.035) was related to the five-parameter model and the highest amount of R2 (0.979) was related to the four and five-parameter models. The results of validation showed that among the bivariate models, the four and five parameter models and among the univariate models, the power model were the most efficient. The obtained results can be used in growth and yield models, preparation of Tarif and standard volume tables.}, keywords = {Bias,Persian oak,Yield table,Weighted linear regressions,Volume modeling,Coppice forest}, title_fa = {مدل‌سازی حجم تک‌درخت برودار (Quercus brantii Lindl) در جنگل‌های جست‌زاد همسال زاگرس مرکزی (مطالعۀ موردی استان چهارمحال و بختیاری، شهرستان اردل و کیار)}, abstract_fa = {هدف این پژوهش، انتخاب مدل مناسب برای برآورد سریع حجم در توده‌های همسال جست‌زاد برودار بود. برای این منظور 19 مدل یک و دومتغیرۀ پرکاربرد در برآورد حجم به‌کار گرفته شدند. در ابتدا داده‌های حجم واقعی به‌دست‌آمده از 73 درخت قطع‌شده در طبقات قطری مختلف در 12 توده از جنگل‌های جست‌زاد شهرستان اردل و کیار به دو مجموعۀ 70 درصدی برای مدلسازی و 30 درصدی برای اعتبارسنجی تقسیم شدند. سپس ضرایب مدل‌های انتخاب‌شده با استفاده از روش حداقل مربعات وزنی محاسبه شد. مدل‌های معنی‌دار با معیارهای مجذور میانگین مربعات خطا و ضریب تبیین رتبه‌بندی شدند. از بین مدل‌های بررسی‌شده 9 مدل انتخاب شد. نتایج برازش مدل‌های انتخاب‌شده نشان داد که کمترین مقدار جذر میانگین مربعات خطا (035/0) مربوط به مدل پنج‌پارامتری و بیشترین مقدار ضریب تبیین (979/0) مربوط به مدل‌های چهار و پنج‌پارامتری بود. نتایج اعتبارسنجی نشان داد که مدل‌های چهار و پنج‌پارامتری در بین مدل‌های دومتغیری، و مدل توانی در بین مدل‌های تک‌متغیری بیشترین کارایی (برترین رتبه) را به خود اختصاص دادند. از نتایج به‌دست‌آمده می‌توان در مدل‌های رشد و محصول‌دهی، تهیۀ جدول حجم یک یا استاندارد دوعامله بهره برد.}, keywords_fa = {اریبی,برودار,جدول حجم,رگرسیون وزنی,مدلسازی حجم,جنگل جست‌زاد}, url = {https://www.ijf-isaforestry.ir/article_52168.html}, eprint = {https://www.ijf-isaforestry.ir/article_52168_8f7e3ae0cc27282498cfe2a1dc3d0b62.pdf} } @article { author = {Payamnoor, V. and Ghandehari, V. and Amirian, H.}, title = {Improvement of seed germination traits in in Scots pine (Pinus sylvestris), Black pine (Pinus nigra) and Turkish pine (Pinus brutia) by using the polyethylene glycol pre-treatment}, journal = {Iranian Journal of Forest}, volume = {9}, number = {3}, pages = {373-384}, year = {2017}, publisher = {Iranian Society of Forestry}, issn = {2008-6113}, eissn = {2423-4435}, doi = {}, abstract = {Proper Seed germination and establishment is one of the most important issues in pre-planting treatments. Seed osmopriming is proposed as a pre-emergence treatment to increase the characteristics germination and seedling establishment, especially in unfavorable conditions. The effects of osmopriming on germination (germination percentage, maximum daily average germination, germination rate, mean germination time, germination value) of Scots pine, black pine and Turkish pine under controlled conditions in order to determine the best treatment were investigated in this research. A factorial experiment was conducted as a completely randomized design with three replicates. Main factors included the time (0, 1, 2 and 3 days) and osmotic potential (0.8, 1.2 and 1.5 MPa) using polyethylene glycol 6000. The results indicated that there were significant differences between treatments on germination characteristics in all three species, and all studied traits were improved by osmopriming. The highest germination factors were recorded for Scots pine and black pine treated with 1day in concentrations of 0.8 MPa (polyethylene glycol 6000) and for Turkish pine were obtained with 2 days in the concentration of 1.2 MPa in compared with control treatment. So it can be suggested that in order to increase the quantity and quality of production in seedlings nursery of these species, the pre-planting treatments should be considered further.}, keywords = {Osmopriming,Polyethylene glycol 6000,Germination rate,Germination speed}, title_fa = {بهبود صفات جوانه‌زنی در بذور کاج جنگلی (Pinus sylvestris)، کاج سیاه (P. nigra) و کاج بروسیا (P. brutia) با استفاده از پیش‌تیمار پلی‌اتیلن گلیکول}, abstract_fa = {جوانه‌زنی و استقرار مطلوب بذر از مهم‌ترین مسائل در تیمارهای پیش از کاشت است. اسموپرایمینگ بذر به‌عنوان یک تیمار پیش‌رویشی برای افزایش صفات جوانه‌زنی و استقرار گیاهچه به‌ویژه در شرایط نامطلوب مطرح است. در این تحقیق، اثر اسموپرایمینگ بر صفات جوانه‌زنی (درصد جوانه‌زنی، میانگین حداکثر جوانه‌زنی روزانه، سرعت جوانه‌زنی، میانگین زمان جوانه‌زنی، ارزش جوانه‌زنی) بذور کاج جنگلی، کاج سیاه و کاج بروسیا در شرایط کنترل به‌منظور تعیین بهترین تیمار بررسی شد. آزمایش فاکتوریل در قالب طرح کاملاً تصادفی با سه تکرار انجام گرفت که فاکتورهای اصلی شامل زمان (صفر، 1، 2 و 3 روز) و پتانسیل اسمزی (8/0، 2/1 و 5/1 مگاپاسکال) با استفاده از پلی‌اتیلن گلیکول 6000 بودند. نتایج تحقیق نشان داد که بین تیمارهای اعمال‌شده و صفات جوانه‌زنی در هر سه گونه تفاوت معناداری وجود دارد و کلیه صفات بررسی‌شده تحت تأثیر اسموپرایمینگ بهبود می‌یابند. بیشترین فاکتورهای جوانه‌زنی به‌ترتیب برای کاج جنگلی و کاج سیاه با تیمار یک روز نگهداری و غلظت 8/0، مگاپاسکال (پلی‌اتیلن گلیکول 6000) و برای کاج بروسیا با محلول 2/1 مگاپاسکال و دو روز نگهداری در مقایسه با شاهد ثبت ‌شد؛ بنابراین می‌توان گفت که برای افزایش تولید کمی و کیفی نهال این گونه‌ها در نهالستان باید تیمارهای قبل از کاشت بیشتر لحاظ شوند.}, keywords_fa = {اسموپرایمینگ,پلی‌اتیلن گلیکول 6000,درصد جوانه‌زنی,سرعت جوانه‌زنی}, url = {https://www.ijf-isaforestry.ir/article_52169.html}, eprint = {https://www.ijf-isaforestry.ir/article_52169_73af777848f97ce698a6cec00731d51e.pdf} } @article { author = {Nezamdost, Hamed and Sefidi, Kiomars and Rasoulzadeh, ali and Sadeghi, Moien}, title = {Quantifying throughfall, stemflow, and rainfall interception in a Fagus orientalis forest and a Picea abies plantation in Siahkal, Gilan}, journal = {Iranian Journal of Forest}, volume = {9}, number = {3}, pages = {385-397}, year = {2017}, publisher = {Iranian Society of Forestry}, issn = {2008-6113}, eissn = {2423-4435}, doi = {}, abstract = {Rainfall partitioning into throughfall, stemflow, and interception is an important component of the water cycle in tree’s ecosystems in forest ecohydrological research. The aim of this research was to compute the throughfall, stemflow, and interception of a natural stand (Fagus orientalis) and exotic plantation (Picea abies) in Siahkal forest (Gilan province). In order to measure the gross rainfall and throughfall, 10 and 50 manual rain-gauges were used, respectively, and stemflow was measured using average of nine individual trees equaled to the stemflow amount of trees. The cumulative percentage of throughfall, stemflow, and interception of F. orientalis stand were 78.2, 10.1, and 11.7%, respectively. For P. abies stand, the corresponding values were 72.1, 4.6, and 23.3%. Paired T-test suggested that rational stemflow (%) of F. orientalis was significantly greater than P. abies (P < 0.01; t = 3.59). Mean rational interception (I%) of the P. abies were significantly greater than observed for the F. orientalis (P < 0.01, t = 9.37). The relationship between gross rainfall and throughfall, stemflow, and interception were observed as positive, and Pearson correlation was significant (P < 0.01). Since planting a new species caused changes in the quantity of input water (sum of the throughfall and stemflow) to the forest floor, hence rainfall partitioning should be considered for forest management and selection of appropriate species.}, keywords = {Forest ecohydrology,Hyrcanian forest,Rainfall partitioning,Species selection}, title_fa = {کمی‌سازی تاج‌بارش، ساقاب و باران‌ربایی در توده‌های طبیعی راش و دست‌کاشت نوئل در جنگل‌های سیاهکل، گیلان}, abstract_fa = {توزیع اجزای بارندگی به تاج‌بارش، ساقاب و باران‌ربایی از اجزای مهم چرخۀ آب در بوم‌سازگان‌های درختی در پژوهش‌های اکوهیدرولوژی جنگل است. هدف این پژوهش، محاسبۀ تاج‌بارش، ساقاب و باران‌ربایی توده‌های طبیعی راش و دست‌کاشت نوئل در جنگل‌های سیاهکل (استان گیلان) بود. برای اندازه‌گیری مقدار باران در هر رخداد، از 10 باران‌سنج دستی و برای اندازه‌گیری تاج‌بارش، از 50 باران‌سنج دستی استفاده شد و متوسط ساقاب 9 درخت، متوسط ساقاب هر گونه در نظر گرفته شد. در تودۀ راش سهم هر یک از درصدهای تجمعی تاج‌بارش، ساقاب و باران‌ربایی از بارش به‌ترتیب 2/78، 1/10 و 7/11 درصد و در تودۀ نوئل، به‌ترتیب 1/72، 6/4 و 3/23 درصد حاصل شد. نتایج آزمون t جفتی نشان داد که درصد نسبی ساقاب راش به‌طور معنی‌داری بیشتر از تودۀ نوئل (59/3t = ؛ 01/0>P ) و درصد نسبی باران‌ربایی تودۀ نوئل به‌طور معنی‌داری بیشتر از تودۀ راش است (37/9t = ؛ 01/0>P ). رابطۀ مقدار باران با مقادیر تاج‌بارش، ساقاب و باران‌ربایی به‌صورت صعودی و بر‌اساس ضریب همبستگی پیرسون، در سطح 99 درصد معنی‌دار بود. با توجه به اینکه کاشت گونۀ جدید، سبب تغییر مقدار آب ورودی به پوشش کف جنگل (مجموع مقادیر ساقاب و تاج‌بارش) شده ‌است، در مدیریت جنگل و انتخاب گونۀ مناسب، باید به مقدار توزیع اجزای باران توجه شود.}, keywords_fa = {اکوهیدرولوژی جنگل,انتخاب گونه,توزیع اجزای باران,جنگل‌های هیرکانی}, url = {https://www.ijf-isaforestry.ir/article_52177.html}, eprint = {https://www.ijf-isaforestry.ir/article_52177_64dd3b08104be7a8d91917caf40a969a.pdf} } @article { author = {Rezaee, K. and Zolfaghari, R. and Naghiha, R.}, title = {Isolation, characterization, and influence of native rhizobacteria on growth of Brant’s Oak (Quercus brantii Lindl.) seedlings}, journal = {Iranian Journal of Forest}, volume = {9}, number = {3}, pages = {399-409}, year = {2017}, publisher = {Iranian Society of Forestry}, issn = {2008-6113}, eissn = {2423-4435}, doi = {}, abstract = {The bacteria species that have positive effects on plant growth and performance, which is called plant growth promoting rhizobacteria (PGPRs), can help or play a crucial role in reforestation programs. For this purpose, phosphate solubilizing bacteria were isolated from soil of Yasuj forests, Iran in this study. Ten isolates of phosphate solubilizing were extracted from five soil samples. Two out of ten bacteria strains with highest phosphate solubilizing activity were selected. The results of gram staining and other biochemical tests illustrated that those bacteria were identified as Microbacterium aurantiacum and Streptomyces cinereorectus. In order to study the effect of PGPR bacteria on growth performance of Brant’s oak seedlings, an experiment as completely randomized block design was done in greenhouse conditions. Treatments consist of four seedlings groups of non-inoculated (control), inoculated by M. aurantiacum, inoculated by S. cinereorectus and inoculated by a mixture of both strains. The results of analysis of variance of the effect of PGPR bacteria strains on growth performance of oak seedlings revealed that all studied traits with exception of stem length and shoot to root ratio were significantly affected by bacterial treatment. So that, inoculated plants showed better growth performance compared to the control treatment, but plants treated with both strains had lower stem and leaf fresh weights in comparison with pure inoculated plants. It can be concluded that the application of biofertilizers especially M.  aurantiacum might be conducted to increase the growth and subsequent establishment of seedlings in the first year resulted in successful reforestation.}, keywords = {biofertilizer,Inoculation,Plant growth promoting rhizobacteria (PGPR),Seedling,Zagros}, title_fa = {جداسازی، شناسایی و بررسی تأثیر باکتری‌های بومی بر رشد نهال‌های بلوط ایرانی (Quercus brantii Lindl.)}, abstract_fa = {باکتری‌هایی که بر رشد و عملکرد گیاه اثرات مثبت دارند و به آنها ریزوباکتری‌های محرک رشد گیاه (PGPR) می‌گویند، می‌توانند در احیای نهال‌های جنگلی کمک شایانی کنند. در این تحقیق ابتدا باکتری‌های محلول‌کنندة فسفات از خاک جنگلی یاسوج استخراج شد. از 5 نمونه خاک، 10 جدایۀ حل‌کنندة فسفات جداسازی شد؛ از این میان 2 جدایه که بیشترین توانایی را در انحلال فسفات داشتند، انتخاب و پس از خالص‌سازی با استفاده از روش‌های رنگ‌آمیزی و آزمایش‌های بیوشیمیایی شناسایی شدند که شامل باکتری‌های Microbacteriumaurantiacum وStreptomyces cinereorectus بودند. سپس به‌منظور بررسی اثر باکتری‌های محرک رشد بر عملکرد نهال‌های بلوط ایرانی، آزمایشی در قالب طرح بلوک‌های کامل تصادفی در گلخانة دانشگاه یاسوج انجام گرفت. تیمار آزمایش شامل باکتری‌های محرک رشد در چهار سطح (عدم تلقیح (کنترل)، باکتری M. aurantiacum، باکتری S. cinereorectus و ترکیب این دو باکتری) بود. نتایج تأثیر باکتری‌های محرک رشد بر نهال‌ها نشان داد که کلیة صفات رویشی به‌جز ارتفاع نهال و نسبت وزن اندام هوایی به زمینی تحت اثر سادة فاکتور باکتری معنی‌دار بودند. رویش و عملکرد نهال‌های بلوط ایرانی تلقیح‌شده با کلیة تیمارهای باکتری (M. aurantiacum، S. cinereorectus و ترکیب دو باکتری M. aurantiacum × S. cinereorectus) از نهال‌های شاهد بیشتر بود؛ اما تأثیر ترکیب دو باکتری بر وزنِ تر ساقه و برگ به‌طور معنی‌داری کمتر از تیمار با هر یک از باکتری‌ها بود. به‌طور کلی می‌توان گفت استفاده از کودهای بیولوژیک به‌خصوص باکتری M.aurantiacumبه رشد بیشتر نهال‌ها در سال‌های اول استقرار و در نتیجه موفقیت بیشتر جنگلکاری‌ها کمک می‌کند.}, keywords_fa = {باکتری محرک رشد,تلقیح,زاگرس,کود زیستی,نهال}, url = {https://www.ijf-isaforestry.ir/article_52175.html}, eprint = {https://www.ijf-isaforestry.ir/article_52175_e21489c59a4a8019b091e35e9f3ae807.pdf} } @article { author = {Ghanbari, Sajad and heshmatolvaezin, seyed mahdi and shamekhi, taghi}, title = {Identification and economic prioritization of non-wood forest products of Arasbaran forests based on traditional harvest statistics (Case Study: Ilganachay Watershed)}, journal = {Iranian Journal of Forest}, volume = {9}, number = {3}, pages = {411-425}, year = {2017}, publisher = {Iranian Society of Forestry}, issn = {2008-6113}, eissn = {2423-4435}, doi = {}, abstract = {Nowadays, importance of non-wood forest products (NWFPs) has been increased. However, there is no comprehensive information about these products. The purpose of this study was to list and prioritize NWFPs of Arasbaran forests economically. To do so, all information related to the harvest, consumption, sales, and processing of NWFPs and other economic activities were collected by surveying at the household and village levels. For better distribution of samples within the study area, all the villages were grouped into three categories using factor analysis in SPSS software. The grouping was based on six effective indicators related to forest activities (area percentage of village forests), livestock (number of livestock per household) and agriculture (irrigation-fed land surface of household), natural conditions (altitude from sea level), literacy and employment (total employment rate and the female literacy rate). After estimating the sample size with Cochran formula, household samples was randomly selected within all groups covering all altitudes ranges. The collected species were ranked using mean annual economic benefits of harvest at household level. The results showed that fruit of 13 species was harvested by local people. In terms of economical prioritization, cornelian cherry, walnut, and sumac are the most important species with 6370, 6317, and 1270 thousand Rials, respectively. Further researches are required to rank the NWFPs in terms of production potential and to reveal their role in local economic development. }, keywords = {Forest fruit,market price,opportunity cost,processing,self-consumption}, title_fa = {شناسایی و اولویت‌بندی اقتصادی محصولات غیرچوبی جنگل‌های ارسباران براساس برداشت‌های سنتی (مطالعۀ موردی حوضۀ آبخیز ایلگنه‌چای)}, abstract_fa = {   امروزه اهمیت محصولات غیرچوبی جنگل بیش از پیش افزایش یافته است. با این‌‌حال، اطلاعات منسجمی در مورد این محصولات وجود ندارد. هدف این مطالعه، تهیۀ فهرست و اولویت‌بندی اقتصادی محصولات غیرچوبی جنگل‌های ارسباران بود. به این منظور، کلیۀ اطلاعات مرتبط با برداشت، مصرف، فروش و فراوری انواع محصولات غیرچوبی با استفاده از روش پیمایشی در سطح خانوار و روستا جمع‌آوری شد. به‌منظور توزیع بهتر نمونه‌ها در سطح منطقۀ تحقیق، کلیۀ روستاهای منطقه براساس شاخص مرتبط با جنگل (درصد جنگل روستا)، دامداری (تعداد دام خانوار) و کشاورزی (سطح زمین آبی خانوار)، شرایط طبیعی (ارتفاع از سطح دریا) و وضعیت سواد و اشتغال (نرخ اشتغال کل و نرخ سواد زنان) با استفاده از روش تحلیل عاملی در نرم‌افزار SPSS به سه طبقه تقسیم شدند. نمونه‌گیری از روستاها به روش طبقه‌بندی و تعداد نمونه‌ها به روش کوکران، توزیع نمونه‌ها در هر یک از طبقات براساس ارتفاع از سطح دریا و انتخاب نمونه‌ها به روش تصادفی صورت پذیرفت. اولویت‌بندی اقتصادی محصولات غیرچوبی براساس میانگین منافع اقتصادی سالانۀ برداشت در سطح خانوار صورت پذیرفت. نتایج نشان داد که محصولات غیرچوبی گونه‌های چوبی منطقه، 13 نوع میوۀ جنگلی را در برمی‌گیرد. گونه‌های زغال‌اخته، گردو و سماق جنگلی با میانگین منافع اقتصادی سالانۀ برداشت در خانوار 6370، 6317 و 1270 هزار ریال به‌ترتیب سه گونۀ مهم اقتصادی منطقه‌اند. مطالعات بیشتری لازم است تا فهرست اولویت‌بندی‌شدۀ محصولات غیرچوبی منطقه به لحاظ پتانسیل تولید مشخص و تأثیر آنها در توسعۀ محلی آشکار شود.}, keywords_fa = {خودمصرفی,فراوری,‌ قیمت بازاری,میوه جنگلی,هزینه فرصت}, url = {https://www.ijf-isaforestry.ir/article_52170.html}, eprint = {https://www.ijf-isaforestry.ir/article_52170_fbc84468656045df35724899dd9a1cbf.pdf} } @article { author = {Askari, Yousef and Soltani, Ali and Akhavan, Reza}, title = {Estimation of annual radial growth, biomass and carbon allocation in different forms of Quercus brantii Lindl. tree species}, journal = {Iranian Journal of Forest}, volume = {9}, number = {3}, pages = {427-444}, year = {2017}, publisher = {Iranian Society of Forestry}, issn = {2008-6113}, eissn = {2423-4435}, doi = {}, abstract = {By comparing the pattern of rings among the trees in each region, it is possible to determine the exact year of ring formation. In this study, the data were collected from two different sites, Basht and Dehdez. In each site, 18 Quercus brantii individuals from two growth forms were selected and cut within each plot and the felled trees were then partitioned and the fresh weight was measured in the field. Also, a complete cross-sectional disk was sampled from each sampled tree at stump height (0.3 m aboveground). Moisture and carbon content of samples were measured in the laboratory and dry weights and carbon stock were also calculated. The proportion of annual diameter and average annual biomass quantity in the scale of individual tree and the growing forms including coppice and high-forest were studied in the current research. Average annual radial increment for Quercus brantii from two plantations, high forest, and coppice, were 1.73 and 1.95 in central Zagros forest and 2.04 and 1.98 (mm/year-1) in south Zagros forest, respectively. Also, average annual biomass increment for high forest and coppice were 6.34 and 6.52 in central Zagros forest and 7.20 and 6.84 (kg/year-1) in south Zagros forest, respectively. The carbon allocation was 48% of the biomass production. The results showed that there are no statistically significant differences between annual diameter increment and average annual biomass amounts in two different sites (p<0.05). Evaluating the annual growth rate in different forest forms and increasing or decreasing growth in different ages is another important and practical issue in estimating the growth, which was discussed in this study.}, keywords = {Biomass,Carbon growth,Mixed stand,Tree ring}, title_fa = {برآورد رویش سالانة شعاعی، زی‌توده و رویش کربن در فرم‌های مختلف درختی گونة برودار (Quercus brantii Lindl.)}, abstract_fa = {با مقایسة الگوی رشد حلقه‌های رویشی در درختان هر منطقه، می‌توان زمان دقیق تشکیل حلقه‌ها را مشخص کرد. در این پژوهش از دو منطقة دهدز و باشت به‌ترتیب واقع در زاگرس مرکزی و جنوبی، 18 پایه در هر منطقه (به‌نسبت مساوی تک‌پایه و جست‌گروه) انتخاب شد و پس از ثبت پارامترهای کمّی آنها، عملیات قطع و جداسازی انجام گرفت. برای برآورد رویش سالانة شعاعی و زی‌توده، نمونه‌ها به‌صورت دیسک در ارتفاع 3/0 متر درخت تهیه و در آزمایشگاه پس از آماده‌سازی سطح آنها، عرض حلقه‌ها با استفاده از میز اندازه‌گیری (LINTAB 6) همراه با برنامة TSAPWIN، با دقت 01/0 اندازه‌گیری شد. براساس نتایج به‌دست‌آمده، متوسط مقدار رویش سالانة شعاعی برودار برای فرم‌های رویشی تک‌پایه و جست‌گروه در رویشگاه خالص به‌ترتیب 73/1 و 95/1 میلی‌متر و در رویشگاه آمیخته به‌ترتیب 04/2 و 98/1 میلی‌متر محاسبه شد. مقدار رویش سالانة زی‌توده برای فرم‌های رویشی تک‌پایه و جست‌گروه در رویشگاه‌های خالص به‌ترتیب 34/6 و 52/6 کیلوگرم و در رویشگاه آمیخته به‌ترتیب 20/7 و 84/6 کیلوگرم در سطح درخت استو رویش کربن در حدود 48 درصد مقدار زی‌توده بوده است. نتایج تجزیة واریانس رویش سالانة شعاعی و زی‌توده برای فرم‌های مختلف رویشی در رویشگاه‌های متفاوت حاکی از نبود اختلاف آماری معنی‌دار بین فرم‌های رویشی مورد بررسی است. ارزیابی نرخ رویش سالانه در فرم‌های مختلف رویشی و افزایش یا کاهش رشد در سنین مختلف از دیگر موضوعات مهم و کاربردی در برآورد رویش است که در این پژوهش بدان پرداخته شده است.}, keywords_fa = {حلقة رویشی,رویش کربن,رویشگاه آمیخته,زی‌توده}, url = {https://www.ijf-isaforestry.ir/article_52178.html}, eprint = {https://www.ijf-isaforestry.ir/article_52178_91dae56ec6d64799837c1162a2da49ee.pdf} }